Have any of you faced the same problem? How am I suppose to connect all the lights now?
View on r/Nepal by Longjumping_Trick179
Have any of you faced the same problem? How am I suppose to connect all the lights now?
View on r/Nepal by Longjumping_Trick179
The unintended pataka for OP. Happy tihar!
There’s no way these ports would handle all the lights.
Collectively the tihar lights use high current. What you need is a multisocket that can handle high ampere current.
Legal firecrackers.
Bro we have same tanna
Bro mero ghar ma ek barsa agadi lyako thiyo it exploded ani mcb down bho. Feri pasal ma gayera bhanyo. Pasaley tried uska ni padkyo ani paisa firta diyo
Same same tanna
Tyo taar ko chai tha vaena tanna chai mero ghar ma ni same raxa😁
i am using this for more than 3 yrs now and each year one or 2 shockets are not working and reaching this year only one shocket is working and i am plaining to buy a new one todayto everyone who are saying its exploded i wanna tell them to check it at the electrician shop each shocket before taking it homebut this post is making me worried about setting up the lights this time FR…
Same issue here, called the electrician 2 times because of this. Best solution seems to be to buy electric cable (Taar) and setup manually which is tedious.
I bought the same last year and it’s working fine until now
Use normal red/black wire and connect all the wires in parallel connection.
Yes facing the same problem
These just don’t work …total waste…wanted to connect it today but no use!
Yo vanda Mahango wala paucha tyo thik huncha yo ta kaam chaina
Did you check before buying? In my case also while I was trying to use it yesterday, the fuse went off whenever I turned on the electricity. Later found that one of the port was short. I removed that port from the series and then it is working. I am using 16 lights in a single cable. So it can handle the electricity for sure. It’s just that the cable particularly might be faulty or else, something might be wrong with one of your bulb which is drawing extra current as it might be short.
We have same bedsheets
Same tanna bro👍
May too late for this Tihar but I suggest you create something like this, that should last you years.
[Home made Jointer](https://youtu.be/vtK_QsvQG9E?si=xnFbKKIoDIwO9SGJ)
You could also use wires with cuts as someone suggested above but I find that risky.
– Chinese Jointer Pidit
check every one of the sockets for power..cut the ones which exploded, cut them and connect others, use kalo tape as well..
I am assuming they exploded because two wires connected during installation.
Bought this last year and is still running very well except some ports don’t work.
Same 3 of them
Mero ta chaliraxa ta majjale aile samma. 1 barsa bhayo